MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Logic Board Replacement

MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Logic Board Replacement will guide you how to replace your logic board for your MacBook Pro 15" Core 2 Duo that you can find in step by step on this manual book. We sure that after you read this book you will know how to replace logic board for your MacBook Pro 15" Core 2 Duo. Do not yank the upper case off quickly. The case is attached to the logic board via a ribbon cable. Lift up at the rear of the case and work your fingers along the sides, freeing the case as you go. Once you have freed the sides, you may need to rock the case up and down to free the front of the upper case.There are four plastic clips above the DVD slot, and another above and to the left of the IR sensor. These clips can be very difficult to disengage without prying. They can also be difficult to re-engage during reassembly.Reassembly Tip: Press down firmly on the tip of the top case above the location of each clip until you hear a snap to reseat them in their slots.Reassembly Tip: The two center DVD clips will rarely snap back into place properly without help, and downward pressure will instead simply deform the frame around the DVD slot. Support the frame by inserting a plastic spudger into the DVD slot directly under the clip location until it is snug, then press down until you hear the snap


Rate This:
Share This:
Filesize: 3,553 KB
View/Download(s): 617
Category: Computer
Date Added: 18 Oct, 2014

It appears you don't have a PDF plugin for this browser.

 

Tags:   macbook   core   model   a1226   a1260   logic   board   replacement

Help us to donate or like our facebook page or share into another social media sites,So we can serve another people who need the ebook,service,repair and owners manual for free. If you have any question you can message us via facebook page.